Synch Socket; Touch Display Settings; Brightness (Brightness) - Metz mecablitz 64 AF-1 digital Mode D'emploi

14.4 Synch socket

The flash can be triggered in automatic flash
A
mode , in manual flash mode
strobe flash mode via the sync socket.
A mecablitz 64af-1P on the camera can trig-
ger another flash via a sync cable..
+
An old flash unit with high-voltage ignition
system may not be connected to the sync
socket.
M
and
SERVICE
SERVICE O
BRIGHTNESS
ROTATION
RESET
BRIGHTNESS O
60
80
100
p
q

15 Touch display settings

15.1 Brightness (BRIGHTNESS)

The screen brightness can be changed in five
levels.
Setting procedure
D
• Press the button as often as it takes
for the selection menu to appear.
SERVICE
• Press the sensor button on the
touch display.
BRIGHTNESS
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select the desired bright-
ness.
• On the touch display, press the sensor but-
ton for the selected brightness, e.g
The setting is adopted immediately.
k
80
.
207