Sony HANDYCAM DCR-DVD100E Mode D'emploi page 94

Connecting your camcorder to your computer – Introduction
For Microsoft Windows 2000
Professional users
1
Connect the AC adaptor to your
camcorder.
2
Set the mode dial to
3
Turn the power on your camcorder by
sliding the POWER switch upward
while pressing the green button.
4
Connect the
camcorder and the
computer using the USB cable supplied
with your camcorder.
USB jack
Your computer recognises the
camcorder, and the "Found New
Hardware" dialog box appears.
5
Follow the instructions given in the on-
screen messages.
The connection between your
camcorder and the computer is
completed.
94
-GB
(Play/Edit).
(USB) jacks of the
(USB) port of the
USB port
USB cable
To disconnect the USB cable
See "To disconnect the USB cable" (page 96).