Changing The Disc Title - Sony HANDYCAM DCR-DVD100E Mode D'emploi

Other functions

Changing the disc title

You can make a title on each disc. As the
default, the date the disc was first used is
added as a disc title.
1
Press SETUP.
MANUAL SET
PROGRAM AE
P EFFECT
D EFFECT
WHT BAL
AUTO SHTR
[ SETUP ] : END
2
Select (DISC SET) with v/V, then press
ENTER.
DISC SET
REC MODE
FORMAT
FINALISE
UNFINALISE
DISC TITLE
RETURN
[ SETUP ] : END
3
Select [DISC TITLE] with v/V, then press
ENTER.
The DISC TITLE display appears.
DISC TITLE
1 1 2003
[ SETUP ] : END
4
Delete unnecessary characters by selecting
[B] with b/v/V/B, then press ENTER.
Characters are deleted from the end.
5
Select the desired character with
b/v/V/B, then press ENTER.
Repeat this step to enter a desired title. Up
to 20 characters can be registered.
DISC TITLE
BEACH
[ SETUP ] : END
54
-GB
SP
REMAIN
[30min]
P1
13:23
P1
6
When you have finished entering all the
characters, select [SET] with b/v/V/B,
then press ENTER.
The disc title is set and the display returns
to the SETUP display.
DISC SET
REC MODE
FORMAT
FINALISE
UNFINALISE
DISC TITLE BEACH
RETURN
[ SETUP ] : END
7
Press SETUP.
The SETUP display disappears from the
LCD display.
Note
When you change a disc title already set by
other devices, the 21st and subsequent
characters are deleted.
Tips
• You can add a space by selecting [ ] between [&]
and [?].
• When you press SETUP in step 6, the disc title is set
and the SETUP display disappears from the LCD
display.
To cancel changing the disc title
In any step from 2 to 5, select [ESC] with
b/v/V/B, then press ENTER.