5. Setting Via the Menu Screen (continued)
"PROCESS (1/2)" Screen
Settings in bold are factory settings
Item
"MASTER
BLACK"
"DETAIL"
"LEVEL"
"V/H BALANCE"
"FREQUENCY"
"V.RESOLUTION"
E-36
For adjusting the pedestal level (master black), which is based on the black colour
when the lens cap is being put on. To view the black portion, increase the pedes-
tal level to brighten the entire screen.
Increase value
: Increases pedestal
Decrease value : Decreases pedestal
{Variable Values : –10 - 0 - +10}
For setting whether to highlight the contour (detail).
"ON"
: Highlight of contour enabled.
"OFF"
: Highlight of contour disabled.
"LEVEL", "V/H BALANCE", "FREQUENCY" items are
displayed as "- - - - - -".
Caution
When "LOLUX" is activated, the adjustment feature will not work even if the menu
operation under "DETAIL" item is performed.
For setting highlight level of contour (detail) when "DETAIL" is set to "ON".
Increase value
: Sharpens contour.
Decrease value : Softens contour.
{Variable Values : –10 - 0 - +10}
For setting whether to emphasize the horizontal (H) or vertical (V) direction during
contour highlight (detail) when "DETAIL" is set to "ON".
Increase value
: Emphasize on H direction.
Decrease value : Emphasize on V direction.
{Variable Values : –5- 0 - +5}
For altering the frequency for contour highlight (detail) when "DETAIL" is set to
"ON". Set this according to the object.
"LOW"
: Lowers the frequency for contour highlight.
Use this when shooting objects with large patterns.
"MIDDLE"
: Sets the frequency for contour highlight to standard.
"HIGH"
: Increases the frequency for contour highlight.
Use this when shooting objects with fine patterns.
For increasing the vertical resolution.
"NORMAL"
: Vertical resolution of approx. 380 lines
"V.MAX"
: Vertical resolution of approx. 450 lines
Caution
In the case of "V.MAX", colours may be found on the brighter portions of the object
depending on its colour temperature. In addition, there will be more residual im-
ages.
Function/Variable Values