Others; Connecting The Remote Control Unit - JVC KY-F560 Mode D'emploi

6. Others

Connecting the Remote Control Unit

Menu function of the camera can be set using the remote control unit (RM-LP55 AND RM-LP57). (For
further details, please refer to the instruction manual of the remote control.)
When operating the menu function of this unit from RM-LP55
Set the "CAMERA TYPE" setting no. of RM-LP55 to "3".
Connection
Connect cable of the remote control unit to the
[REMOTE] terminal of this unit.
Operation
1.
Press the [ENTER/SET] and [FAR] buttons at
the same time when turning the [OPERATE]
switch to [ON].
Display on LCD screen will be as shown in the
following diagram.
AUTO IRIS LEVEL
2.
Use the [MENU§/∫] buttons to display the
"CAMERA TYPE" setting screen.
Display on LCD screen will be as shown in the
following diagram.
CAMERA TYPE
E-44
AW BARS
MENU SET
REMOTE
LENS
VIDEO OUT
GENLOCK IN
DC IN
POWER
SEE INSTRUCTION MANUAL
ON
Camera Type
1
Setting No.
[MENU§/∫]
3.
Use the [FUNC2§/∫] buttons to set the camera
type setting no. to "3".
4.
Pressing the [ENTER/SET] button returns to the
normal mode of use after "INITIALIZE" is dis-
played.
Notes
● In the case when the menu function of this unit is
identical to the remote control unit, the switch func-
tion of the remote control will override that of this
unit.
● FOCUS and ZOOM cannot be adjusted using the
remote control unit.
● When connected to RM-LP55, even if the
"V.SCAN" under "SHUTTER" item is set to 1/50.0,
the camera will operate based on 1/50.1.
As such, the image level will change if the "STEP"
mode under "SHUTTER" item is changed from
NORMAL (1/50) to "V.SCAN".
RM-LP55
RM-LP55
REMOTE CONTROL UNIT
FUNC 1 FUNC 2
GAIN SHUTTER IRIS MANU OPERATE
W.PAINT
ENTER
FUNC 1 FUNC 2 /SET
MENU
SHUTTER
W.BAL GAIN
FILE
FOCUS
NEAR FAR
SLOW FAST
ZOOM
TELE
WIDE
[FUNC2§/∫]
[ENTER/SET]
[FAR]