JVC KY-F560 Mode D'emploi page 43

"FILE MANAGE" Screen (continued)
1. 2.
- - - - - -
F I LE MANAGE
LOAD F I LE A
LOAD CANCE L
STORE F I LE A
STOR E CANCE L
RESET F I LE A
RESE T CANCE L
PAGE BACK
3. 4.
- - - F I LE MANAGE - - -
LOAD F I LE A
LOAD EXECUTE
STORE F I LE A
STOR E CANCE L
RESET F I LE A
RESE T CANCE L
PAGE BACK
1. 2.
- - - - - -
F I LE MANAGE
LOAD F I LE A
LOAD CANCE L
STORE F I LE A
STOR E CANCE L
RESET F I LE A
RESE T CANCE L
PAGE BACK
3. 4.
- - - F I LE MANAGE - - -
LOAD F I LE A
LOAD CANCE L
STORE F I LE A
STOR E
CANCE L
RESET F I LE A
RESE T EXECUTE
PAGE BACK
Retrieve file.
1.
Use the [ / ] buttons to select "LOAD FILE", then press the [SET]
Blinking
button.
The set value displayed will start to blink.
2.
Use the [ / ] buttons to select "A","B" and "C", then press the
[SET] button.
3.
Use the [ / ] buttons to select "LOAD", then press the [SET] but-
ton.
"CANCEL" will start to blink.
4.
Use the [ / ] buttons to select "EXECUTE", followed by pressing
Blinking
the [SET] button to retrieve the menu settings from the selected file
destination.
Reset the set value.
1.
Use the [ / ] buttons to select "RESET FILE", then press the
[SET] button.
The set value displayed will start to blink.
2.
Use the [ / ] buttons to select select a file to reset, then press
Blinking
the [SET] button.
"A", "B", "C", "CURRENT" (Current Set Value)
3.
Use the [ / ] buttons to select "RESET", then press the [SET]
button.
"CANCEL" will start to blink.
4.
Use the [ / ] buttons to select "EXECUTE" and press the [SET]
button to reset the set value.
Note
Blinking
Resetting the stored files ("A", "B" and "C") will not reset the current set
value.
To reset the current set value, select "CURRENT".
E-43