Introduction; Intended Use - Renkforce 751905 Notice D'emploi

1. Introduction

Dear Customer,
Thank you for purchasing this product.
This product complies with the applicable national and European requirements.
To maintain this status and to ensure risk-free operation, the user must comply with these operating ins-
tructions!
All company names and product names are trademarks of the respective owners. All rights reserved.
If there are any technical questions, please contact:
International: www.conrad.com/contact
United Kingdom: www.conrad-electronic.co.uk/contact

2. Intended use

This code lock is designed to secure doors against unauthorised entry (e.g. office). A maximum of 99 users
with different codes can be saved to the unit. It offers comfortable input via touch screen and is suitable for
connection to electric door openers which have an operating voltage of 12 to 24 V (AC/DC).
Additionally, this code lock has an alarm output (e.g. for connecting a visual signal light, connection:
"Al Out (-)) and an alarm input (e.g. for connecting a door magnet contact).
The power supply is at 12 - 24 V (AC or DC).
The code lock is manufactured to protection category IP65 and is therefore appropriate concealed instal-
lation in unprotected outdoor areas.
Any use other than the intended use described above is forbidden and may harm the product and result in
short circuit, fire, electric shock, etc.
Any use other than the intended use described above is not permitted and may harm the product and result
in short circuits, fire, electric shocks etc. The entire product must not be modified or converted. Always
observe the safety instructions included in these operating instructions. Please read the operating instruc-
tions carefully and keep them for later reference.
15