DAB E.SWIM Instructions Pour L'installation Et La Maintenance page 50

Type of contact
Max. bearable voltage [V]
Max. bearable current [A]
Max. bearable power
The functions that can be activated on the output contact are described in paragraph 5.7.

Use only the cable kit to connect to the input and output connector. The technical details of the connector and
connection are included in the kit.

Attention: keep the cable for the input and output signals well away from the power and alternate supply lines
(230V and similar), so as to limit disturbances and interference that can alter the signals.

When it is not in use, the connector on the pump must be kept accurately closed, with the cap well tightened.
Only in this way is the necessary resistance to water and damp guaranteed.
Wiring diagram with digital relay inputs via optional E.ADAPT module (not included)
ENGLISH
Characteristics of the output contacts
NO (normally open)
24Vac / 24Vdc
2A
1 A
2.5VA / 2W
Table 2 - Output contact
-> resistive load
-> inductive load
48
CONTROL SYSTEM
RELAY CONTACTS
ANALOG/DIGITAL
CONTACTS