Hedge Trimming Techniques - RedMax CHT2250 Mode D'emploi

7. Operation
excess grease, there is no cause for
alarm. For next use just wipe it off with
the engine stopped.

HEDGE TRIMMING TECHNIQUES

Trim sides of a hedge first, and then the
top.
OP7
Vertical cut:
• With the 2-sided blade model CHT2250
use an arcing cut from the bottom
upwards, then downwards to use both
sides of the blades (OP7).
Horizontal cut:
OP8
• In order to get the best cutting results,
slightly tilt the blade (5÷10°) towards
the cutting direction (OP8).
Cut slowly, specially with thick hedges.
Always follow the safety precautions.
The hedge-trimmer must only be used
to trim hedges or small bushes. It is
forbidden to cut other types of
material. Do not use the hedge-trimmer
as a lever to lift, move or break
objects, nor lock it on fixed supports. It
is forbidden to apply tools or
applications that are not the ones
indicated by the manufacturer onto the
hedge-trimmer's power take-off. Do not
use it for pruning trees or cutting
grass.
WARNING
CHT2250
U
S
US-11