Table des Matières
Publicité
OP9
OP10
OP11
OP12
30
English
7. Operation
HEDGE TRIMMING TECHNIQUES
Trim sides of a hedge first, and then the top.
Vertical cut:
• With the single-sided blade hedge-trimmer, model
HTZ2401 always cut from the bottom up (OP9).
• With the 2-sided blade model CHTZ2401 use an
arcing cut from the bottom upwards, then
downwards to use both sides of the blades (OP10).
Horizontal cut:
• In order to get the best cutting results, slightly tilt the
blade (5÷10°) towards the cutting direction (OP11,
OP12).
Cut slowly, specially with thick hedges.
WARNING
Always follow the safety precautions.
The hedge-trimmer must only be used to trim
hedges or small bushes. It is forbidden to cut other
types of material. Do not use the hedge-trimmer as
a lever to lift, move or break objects, nor lock it on
fixed supports. It is forbidden to apply tools or
applications that are not the ones indicated by the
manufacturer onto the hedge-trimmer's power
take-off. Do not use it for pruning trees or cutting
grass.
Publicité
Table des Matières
