Operating Instructions; Operate The Whole Unit; Operating The Sub-Unit - Rotel POWERPRO 6081CH Mode D'emploi

 OPERATING INSTRUCTIONS

Operate the whole unit

o There are two switches, including a power (1) and a speed adjust switch (2).
o Press down the power switch (1), the appliance enters working mode and the roll brush
starts to work. It is used for cleaning floor and carpet.
o Press down the speed adjust switch (2), the appliance slows down. Press the speed
adjust switch (2) again to return to normal speed.
o Press the power switch (1) if you want to make the appliance stop working.
o During operation, please pay attention to the charging indicators (3). The indicators
will go out gradually as the level of charge reduces and the appliance will stop working
automatically when all the indicators have gone out.

Operating the sub-unit

o Press down the sub-unit release button (4), grasp the handle of the sub-unit to remove
it by following the arrow shown, and then press down the sub-unit switch (5). The sub-
unit enters working mode, and you can press the switch (5) to make it stop working.
o If you need to use the dusting brush, please insert it into the suction nozzle of the sub-
unit and then activate it again. If you need to use the crevice tool, insert it into the
suction nozzle of sub-unit and then activate it again.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
37