Hot Surface Indicator - Wolf ICBCI365C Guide D'utilisation Et D'entretien

COOKTOP OPERATION
Cooktop Operation
GRIDDLE USE
The bridge element provides an oblong heating area for use
with a griddle, open roaster or fish poacher.
To preheat a griddle, set the bridge element power level to
high for five minutes, then reduce for cooking.
CAUTION
A griddle, open roaster or fish poacher should not be
used when the bridge element is off or with any other
combination of heating elements.
TIMER
The timer can be set in one-minute increments up to 99
minutes. Once a time is set, will illuminate on the control
panel and the countdown is visible on the timer display. The
timer is independent from the cooktop.
Setting timer:
Touch .
1
Touch and hold + or – until desired time is shown in the
2
timer display. Timer will begin countdown in minutes.
Timer will chime with one minute left and completes the
3
countdown in seconds.
When complete, timer will chime and continue to chime
4
until is touched.

HOT SURFACE INDICATOR

A hot-surface indicator will illuminate when the surface tem-
perature of any heating element rises above 65°C.
illuminate on the control panel and remains illuminated until
the entire surface reaches a safe temperature.
ALL OFF
When one or more heating elements are on, will illu-
minate on the control panel. To turn off all elements at the
same time, touch .
Sabbath
(ELECTRIC COOKTOP)
This appliance is certified by Star-K to meet strict religious
will regulations in conjunction with specific instructions found
on www.star-k.org.
wolfappliance.com
|
9