Operation Via The Keyboard - HBM MP60DP Manuel D'emploi

10
5

Operation via the keyboard

During measurement you can press
the display (e.g. mV; V; Out,In; error messages).
Next to the status message "ERROR" the display shows the status of the
Profibus DP connection. One of the following status messages is displayed in
each case:
BD_SEAR (baud rate search)
WT_PARM (waiting for parameter)
WT_CONF (waiting for configuration)
DATA_EX (cyclical data communication)
ERROR (bus error)
The LED shows the operating status (ready to take measurements, overflow
etc.) of the MP60DP. Instead of the CAN status (as with the MP60), however,
the Profibus status is displayed.
Operating status:
LED Status
colour
Green Steady light
Yellow Steady light
Red Steady light
The representation of the other operating statuses is the same as that of the
MP60.
HBM
− to view the status messages in
−
+
Meaning
Profibus status
DATA_EX status
BD_SEAR, WT_PARM, WT_CONF status
ERROR status
PME−MP60DP
A0623-6.1 en/de/fr