Installation - HBM MP60DP Manuel D'emploi

8
3

Installation

• Connect the MP60DP module to a 24 V supply voltage.
• Connect the Profibus cable to the MP60DP module. Ensure that a
terminating resistance is connected to the first and last Profibus unit (the
housing of the Profibus connector usually contains a sliding switch for this
purpose).
Example:
Profibus
connector
First device in
the bus line
sliding switch of Profibus connector to
"Resistance ON" .
Fig. 3.1: Profibus operation
HBM
PLC
Profibus
connector
sliding switch of Profibus
connector to "Resistance ON"
PME−MP60DP
Last device in
the bus line
A0623-6.1 en/de/fr