Technical Specifications - Beurer EM 29 Mode D'emploi

If you cannot find a solution to your problem here, contact
our Customer Services.

10. Technical specifications

Circumference of
the cuff
Type
Weight
– Device
– Device, cuff and
cable
Electrode size
Parameter (500 ohm
load)
Pulse length
Waveform
Voltage supply
Approx. 25 to 70 cm
EM 29
– Approx. 90 g incl. batteries
– Approx. 210 g incl. batteries
Approx. 114 x 59 mm
Output voltage:
max. 50 Vpp / 5.5 V rms
Output current:
max. 100 mApp / 11 mArms
Output frequency: 2 – 110 Hz
60 – 220 μs per phase
Symmetric, biphasic rectangu-
lar pulse
4.5 V
(3 x 1.5 V AAA, type LR03)
Operating conditions
Storage
We reserve the right to make technical changes to improve
and develop the product. If the device is not used accord-
ing to the instructions specified, perfect functionality can-
not be guaranteed! This device complies with European
standards EN60601-1 and EN60601-1-2 and is subject to
special precautionary measures with regard to electromag-
netic compatibility. Please note that portable and mobile
HF communication systems may interfere with this device.
More details can be requested from the stated Customer
Service address or found at the end of the instructions for
use.
This device meets the requirements of European Directive
93/42/EC for medical products, as well as those of the
Medizinproduktegesetz (German Medical Devices Act). For
this device, a functional test and instruction in accordance
with Section 5 of the Medical Devices Operator Ordinance
(MPBetreibV) is not required. It is also not necessary to
carry out safety checks in accordance with Section 6 of the
Medical Devices Operator Ordinance (MPBetreibV).
29
0 °C to 40 °C,
20 to 65% relative humidity
0 °C to 55 °C,
10 to 90% relative humidity