Care, Maintenance And Disposal; Replacement Parts; Technical Specifications - Beurer MP 42 Mode D'emploi

6. Care, Maintenance and Disposal

Turn the unit off and unplug the power cord from the electrical outlet before
cleaning the device. Clean the device with a slightly moistened cloth. You can
also moisten the cloth with a mild detergent to remove stubborn stains. Keep
water out of the device. If water does contact the device, let it dry thoroughly
before using. Clean the attachments with a cloth or brush moistened with alcohol;
dry them carefully afterwards. Do not use harsh chemicals or abrasive cleaners
on the device.
Disposal
Observe the local regulations for material disposal. Dispose of the device in
accordance with local regulations.
If you have any questions, please contact the local authorities responsible for
waste disposal.

7. Replacement Parts

A complete replacement set (UPC 853879007577) is available on
www.amazon.com. The following parts are included:
Flame milling cutter
Cylindrical milling cutter
Felt cone
Sapphire cone
Sapphire callus rasp
Coarse Sapphire Disc
Fine Sapphire Disc

8. Technical Specifications

Supply
Weight
Dimension
Speed
Input: 100 - 240 V AC 50/60 Hz 0.35 A
Output: 30 V DC 250 mA 7.5 W
approx. 0.22 lb (100 g)
5.98 x 1.46 x 1.46 in (152 x 37 x 37 mm)
2,500 +/- 20 % - 4,600 rpm +/- 15%
8