Disposal; What If There Are Problems; Technical Specifications - Beurer TL 100 Mode D'emploi

10. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the device at a suitable local collection or recycling point. Dispose of the device in ac-
cordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any ques-
tions, please contact the local authorities responsible for waste disposal.

11. What if there are problems?

Problem Possible cause
Device does On/off button switched off.
not light up.
No electricity.
No electricity.
LEDs have reached the end of their
service life.
LEDs faulty.

12. Technical specifications

Model No.
Dimensions (W, H, D)
Weight
Light
White wavelength
Maximum light output
Output
Brightness
Radiation
Operating conditions
Storage conditions
Product classification
Color temperature of LEDs 5,300 K (+/− 300 K)
Accessories
Frequency band
Transmission power
Subject to technical changes.
The serial number is located on the device or in the battery compartment.
We hereby guarantee that this product complies with the European RED Directive 2014/53/EU.
Please contact the specified service address to obtain further information, such as the CE Declaration of Con-
formity.
This device meets the requirements of the European Directive 93/42/EEC and 2007/47/EC Medical Devices 9 as
well as the Medical Devices Act.
TL 100
366 x 335 x 203 mm
1130 g (approx. 1243 g with mains part)
LED
410 – 800 nm
67.24 mW/m²
36 W
10.000 lux (Distance: approx. 10 cm)
Radiant power outside of the visible range (infrared and UV) is low enough that
no eye or skin damage is anticipated.
5°C to +35°C, 15 - 90% relative humidity
atmospheric pressure range 86-106 kpa
-20 °C to +50 °C, 15 - 90% relative humidity
atmospheric pressure range 86-106 kpa
External power supply, protection class II, IP21
Mains part, Instructions for use
2402 – 2480 MHz
max. – 7.13 dBm
Solution
Switch on the on/off button.
Connect the mains part properly.
The mains part is faulty. Contact customer ser-
vices or your retailer.
For repairs, please contact Customer Services or
an authorised retailer.
17