Operation; General Notes On Use - Beurer EM 29 Mode D'emploi

Before positioning
universal cuff, first moi-
sten the water contact
electrodes and the knee/
elbow with water.
Position the universal cuff on your knee or elbow. At
this point, ensure that the surfaces of the water con-
tact electrodes surround the knee/elbow. In doing so,
the round opening of the universal cuff must lie on the
kneecap/elbow tip.
2. Fix the universal cuff in the de-
sired position using the hook-
and-loop fasteners. Ensure
that the universal cuff is not too
tight but that the water contact
electrodes still have sufficient
contact with the skin.
3. Insert the plug for the connec-
tion cable into the connector
socket [5] on the control unit.
the
Replacing the battery
Please replace the batteries
when the battery status symbol
appears in the display [7].
• Open the battery compartment [4]
by pushing the cover in the area
marked with an arrow and sliding
downwards.
• 3 x 1.5 V batteries, type AAA (LR 03 Micro) should be
inserted for operation. Ensure the polarity is correct. Ob-
serve the graphic in the battery compartment.
• Do not use rechargeable batteries.

6. Operation

General notes on use

Do not switch on the device until the cuff is correctly
positioned. See chapter 5.
The knee and elbow TENS is intended for individual treat-
ment of pain in the knee and elbow.
Switching on
Hold down the On/Off button [1] until a short signal sounds
and the LCD display [6] switches on. When the device is
24