Replacing The E-Cartridge - Watts e-ULTRAMIX 3/4 Manuel D'installation

Manual adjustment of the mixed water temperature
This function is used to manually set the required temperature in the event of a power
failure.
To do this, remove the electric actuator, reposition the white cap (provided with the
e-Cartridge) on the axis of the e-Cartridge so that the water temperature can be regu-
lated to the desired value.
Note that even without electrical power, the e-ULTRAMIX
to work in order to mix the water at the temperature set.

Replacing the e-Cartridge

Opening the mixing valve:
- Close the cold water, hot water and mixed water inlets.
- Remove the actuator and the mixed water probe from the e-Cartridge.
- Remove the e-Cartridge.
Replacing the e-Cartridge:
- Fit the new e-Cartridge.
- Fit the temperature probe to the new e-Cartridge.
To enable automatic notification of the next scheduled replacement, remember to reset
the alert (see Settings menu "Cartridge alert").
Point your smartphone at the QR code to view the video that ex-
plains how to assemble and install the e-ULTRAMIX
(download an application for reading QR codes), or visit the site:
https://wattswater.eu/technical-support/video-review/9594/
The descriptions and photographs
Watts Industries reserves the right to carry out any technical and design improvements to its products without prior notice. Watts declines all liability for any claims
due to these changes.
Warranty: duration of the warranty of the products in the e-ULTRAMIX
Products Duration
e-ULTRAMIX
®
(mixing valve + electronics)
New cartridge
Cartridge (after
yearly maintenance)
Electronics
(unit + actuator)
The warranty is only considered valid if the mixing valve was installed by a quali-
fied professional, in accordance with the technical instructions, the rules of good
practice, the standards, regulations and the French technical documents (DTU) in
force, to be more precise, the DTU Plomberie 60-1 (NFP 40-201). Similarly, the
cartridge of the mixing valve must be subjected to yearly maintenance by Watts.
In compliance with the general sales conditions and as a warranty, Watts under-
takes to replace any mixing valve or mixing valve components found to be faulty
free of charge No warranty can be higher than the purchase price value of the
device or part recognised as being defective.
All sales and contracts for sale are expressly conditioned on the buyer's assent to
Watts terms and conditions found on its website at www.wattswater.eu.
Watts hereby objects to any term, different from or additional to Watts terms,
contained in any buyer communication in any form, unless agreed to in a writing
signed by an officer of Watts.
22017556_e-ULTRA-IM-FR-W-ML-07-20-Rev.1
28
contained in this
Conditions
1 year Yearly maintenance of the cartridge
1 year -
Within 5 years of the date of the
1 year
first invoice
1 year -
document are supplied by way
® range. Exclusion from warranty: apart from the exclusions indicated in the general sales
conditions, the warranty is not applicable and the Supplier declines all liability in
the following cases:
1. The maintenance of the mixing valve cartridge was not performed by Watts
on a yearly basis.
2. The damage was caused by external factors, such as climatic conditions,
accidents (caused by water), force majeure, abuse, vandalism, attempts to
dismantle or tamper with the mixing valve mechanism.
3. The failure of the mixing valve is partially or fully, directly or indirectly due to a
defective installation of the hot water production system of which the mixing
valve is a part, and/or due to excessive water pressure or temperature out-
side the applicable specifications, a thermal shock, a corrosive environment
or corrosive water.
4. The mixing valve has failed due to foreign bodies originating from the system
or the water supply.
5. The failure of the mixing valve is due to scaling of the mixing valve.
6. The failure of the mixing valve is partially or fully due to a system that is
not compliant with the state-of-the-art standards, the installation instructions
indicated by Watts Industries, the health regulations and the legislation in force
in the country where it is installed.
7. In all cases, Watts Industries cannot, under any circumstances, be held liable
for damage to property or injuries whether direct or indirect caused by any use
of the system that is not compliant with the manufacturer's recommendations
or state-of-the-art standards. Any claims for damages to property or real
estate, or any other losses directly or indirectly resulting from a failure of the
mixing valve are also excluded from the warranty.
Colmworth Business Park • PE19 8YX St. Neots • United Kingdom
Telephone: +44 (0) 1480 407074 • Fax: +44 (0) 1480 407076
(in the event of power failure)
thermostat system continues
®
system
®
of information only and
Watts Industries UK Ltd
wattsuk@wattswater.com • www.wattswater.co.uk
are not binding.
© 2020 Watts