Technical Data; General; Gas-Cooled Torch Body - Ttb 80, Ttb 160, Ttb 220, Ttb - Fronius TTB 80 G Instructions De Service

Technical data

General

This product meets the requirements set out in standard IEC 60974-7.
NOTE!
The welding current specifications only apply when using the standard wearing
parts.
When using gas lenses and shorter gas nozzles, the welding current is reduced.
NOTE!
For gas-cooled torch bodies, the welding current specifications only apply from a
torch body length L ≥ 65 mm.
When using shorter torch bodies, the welding current is reduced by 30%.
NOTE!
When welding at the power limit of the welding torch, use larger tungsten electro-
des and gas nozzle opening diameters in order to increase the service life of the
wearing parts.
Take into account amperage, AC balance, and AC current offset as performance-enhan-
cing factors.
Gas-cooled torch
body -
DC welding current
TTB 80, TTB 160,
at 10 min / 40 °C
TTB 220, TTB 260
(104 °F)
AC welding current
at 10 min / 40 °C
(104 °F)
60
TTB 80 G
1)
35% D.C. / 80 A 35% D.C.
1)
60% D.C. / 60 A 60% D.C.
1)
100% D.C. / 50 A 100% D.C.
1)
35% D.C. / 30 A 35% D.C.
60% D.C.
100% D.C.
Argon
(Standard EN 439) (Standard EN 439)
1.0 - 3.2 mm
0.039 - 0.126 in.
TTB 160 G / F
1)
/ 160 A 35% D.C.
1)
/ 120 A 60% D.C.
1)
/ 90 A 100% D.C.
1) 35% D.C.1) / 180 A
/ 120 A
60% D.C.1) / 130 A
1)
/ 90 A
100% D.C.1) / 100
1)
/ 70 A
Argon
(Standard EN 439)
1.0 - 3.2 mm
0.039 - 0.126 in. 0.039 - 0.158 in.
TTB 220 G
1)
/ 220 A
1)
/ 170 A
1)
/ 130
A
A
Argon
1.0 - 4.0 mm