Fronius TTB 80 G Instructions De Service page 46

9
A
* Inside pocket
10
A
* Inside pocket
11
NOTE!
When operating with water-cooled extension hosepacks, observe the following:
▶
▶
▶
46
1
1
*
Close the protective bag
Following commissioning, as soon as the power source in the coolant container of
the cooling unit shows a good return flow, make sure that there is sufficient coolant
in the cooling unit.
In conjunction with a MultiControl cooling unit, a fully filled coolant tank can overflow
when the hosepack is emptied - risk of slipping!
Observe the Operating Instructions for the cooling unit!
Attach the two Velcro strips supplied to the
inside pocket
2
2
B
Connect the TIG Multi Connector and
position it next to the inside pocket
B