4 Putting into operation
4.1.2 PA liner
NOTICE
• For PA liners with an outer diameter of 4.00 mm, the capillary tube in the distance
adaptor must be replaced with a guide tube.
Carry out each step in accordance with the figures below:
Fig. 5
Removing the nut
W
NOTICE
• We recommend that you sharpen the PA liner to an angle of 40° before assembly using
the ABICOR BINZEL sharpener.
Fig. 6
Sharpening the PA liner
NOTICE
• Slide the PA liner through the wire conduit until you feel it connect with the contact tip.
EN - 10
A
40°
MB EVO PRO/MB EVO
A
B
C
BAL.0414.0 • 2019-05-17