Setting - Becker Centronic SensorControl SC43 Notice De Montage Et D'utilisation

HOLIDAY, LIGHT SENSOR (holiday OFF/ON, sun/twilight)
Operting mode
MENUE
MAIN MENU
OK

SETTING

1. Press the MENU button.
2. To select the SETTING menu, press the + button until SETTING appears.
3. Confirm with OK.
4. HOLIDAY ON/OFF appears.
5. Confirm with OK.
You will only see this interactive window if a light sensor is in-
serted in the device.
6. You have confirmed the HOLIDAY function. SUN appears.
7. The previously set value, if any, appears
8. You can adjust the sun value using the +/- buttons (the two left digits on the
display indicate the current light value).
9. Confirm your setting with OK. Set TWILIGHT in the same way as SUN.
10. Press the MENU button twice to switch to Operating mode.
Setting
OK
HOLIDAY OFF
HOLIDAY ON
LIGHT
SENSOR
AVAILABLE ?
SUN
OK OK
TWILIGHT
Press MENU
button 2 x
15 - en