Installation / Connection - Becker Centronic SensorControl SC43 Notice De Montage Et D'utilisation

Installation of the SC43 on the timer for light sensor Centronic Time-
Control TC52 / radio timer for light sensor Centronic TimeControl
TC511
Installation on the device
1. Cut the cable to the desired length (e.g. with diagonal pliers).
2. Strip approx. 5 mm of the cable.
3. Connect the cable to the terminal.
4. Connect the terminal to the socket (see fig.).
Attaching the SC43 to the window:
The glass must be thoroughly cleaned before affixing the sensor.
Affix the SC43 to the window with the suction cup.
14 - en

Installation / connection