Setting - Becker SensorControl SC43 Notice D'utilisation

HOLIDAY SETTING, LIGHT SENSOR SETTING (Holiday OFF/ON, Sun/Twilight)
Operting mode
MENUE
MAIN MENU

SETTING

1. Press the MENU button.
2. To select the SETTING menu, press the + button until SETTING appears.
3. Press OK to confirm.
4. HOLIDAY ON / OFF appears.
5. Confirm your setting by pressing OK.
Note
This dialog box will only be displayed if a light sensor is connected to the device.
6. You have confirmed the HOLIDAY function. SUN will appear.
7. The value set is displayed.
8. The sunlight setting can be changed by pressing the +/- button.
(The two digits on the left of the display show the current light setting)
9. Confirm your entry by pressing OK.
To set the TWILIGHT CONTROL, follow the same procedure as for SUN.
10. Press the MENU button twice to return to the operating mode.

Setting

HOLIDAY OFF
HOLIDAY ON
14
Operating Instructions
LIGHT
SENSOR
AVAILABLE ?
SUN
TWILIGHT
Press MENU
button 2 x