BIOM® ready
Mounting on a Sterile Adapter Plate
Put the sterile cap onto the knurled screw.
Slide the sterile adapter plate into the dovetail
mount.
Do not touch the microscope while doing this.
en
Instruction Manual
1
Using a minimum of force, plug the BIOM® ready
onto the adapter plate until it reaches the stop.
You must overcome a detent which locks the
connection.
Caution
Risk to the patient if the BIOM® ready is inserted
incorrectly.
If you do not insert the BIOM® ready correctly, you
cannot use it safely and you will get a decentered
fundus image.
Make sure that the BIOM® ready has been
inserted up to the limit stop.
G/54413/0718/in
2
To swing in the BIOM® ready, lift the bottom part a
little.
3
16