Attach the new seal to the side and
clip it into position.
Replace the dust box in the robot
vacuum cleaner, making sure it clicks
into position.
Cleaning the front wheel
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as it
can come loose.
Unclip the cover.
Remove the front wheel.
Remove any threads and hairs and
clean the front wheel with the brush
end of the cleaning brush.
Replace the front wheel and close the
cover making sure it clicks into posi-
tion.
Cleaning the sensors
Carefully clean the sensors on the
side and the bottom of the robot vac-
uum cleaner using a dry cotton wool
bud.
Changing the batteries in the remote
control
The remote control requires two AAA
(1.5 V) batteries.
Remove the battery compartment
cover.
Replace the batteries making sure the
polarity is correct.
Replacing the rechargeable battery
Keep a spare original Miele lithium-ion
rechargeable battery to hand for your
Scout RX1.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as it
can come loose.
Unscrew the cover of the recharge-
able battery compartment on both
sides with a cross-headed screw-
driver.
en
23