Replacing The Exhaust Filter; Cleaning The Roller Brush - Miele HS17 Mode D'emploi

en
 Clean the bottom of the lid and also
the filter grille using the brush end of
the cleaning brush.
 Close the lid of the dust box making
sure it clicks into place.
 Replace the dust box in the robot va‐
cuum cleaner, making sure it clicks
into position.

Replacing the exhaust filter

Replace the exhaust filter in the robot
vacuum cleaner after approx. three
months. Two replacement exhaust fil‐
ters are supplied.
The exhaust filter is in the bottom of the
dust box lid.
 Unclip the filter grille and replace the
exhaust filter.
 Close the filter grille making sure it
clicks into position.

Cleaning the roller brush

 Remove the dust box and place the
robot vacuum cleaner upside down
on a level, clean surface.
50
 Remove the roller brush cover.
 Remove the roller brush, taking care
not to lose the square guide.
 Use scissors to cut any threads or
hairs which have wound around the
roller brush. There is a groove on the
roller to guide you.
 Remove the threads and hairs with
the comb end of the cleaning brush.
 Replace the roller brush. Make sure
you position it carefully and that the
square guide is attached.
 Lock the cover making sure it clicks
into position.