Table des Matières
Publicité
en
Use both hands to grip two opposite
bunches of the side brushes and pull
them out.
Remove threads and hair using the
wiper which is located on the bottom
of the cleaning tool.
Hold the wiper over a bin.
Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
Press the two cleaned side brushes
carefully onto their pins until they
audibly engage. Take care to comply
with the markings L and R.
In order to continue to achieve the
best possible cleaning results re-
place the side brushes with new
ones after approx. one year.
Cleaning the roller brush
Clean the roller brush as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
58
Remove both side brushes, see pre-
vious description "Cleaning the side
brushes".
Unlatch the roller brush cover and re-
move the cover.
Remove the roller brush.
Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors.
Remove the threads and hair using
the wiper which is located on the bot-
tom of the cleaning tool.
Hold the wiper over a bin.
Publicité
Chapitres
Table des Matières
