Electrical Connection - IFM Electronic AT-interface AC2516 Notice De Montage

4x LED yellow
analogue inputs
5

Electrical connection

The analogue module is connected to the AS-Interface via the stan-
dardised EMS (supply from AS-i) or the E-EMS (supply from an ext.
24 V PELV voltage source).
If the supply is to be from an external 24 V source, a FC-E lower part
(art. no. AC5003 or AC5011) must be used.
If a total of over 100 mA is needed for the sensor supply, the
supply must be from an external 24 V PELV voltage source.
The supply is automatically changed when the external 24 V vol-
tage is supplied.
90
LED green AUX
Pin 1: sensor supply +24 V
3 4
Pin 2: AI+ analogue input
Pin 3: sensor supply 0 V
Pin 4: AI- analogue input 0 V
2
1
Pin 5: functional earth
LED infrared receiver
fixture infrared adapter
LED red FAULT
LED green PWR
label
M12 socket
11