Electrical Connection - IFM Electronic AS-interface AC2503 Notice De Montage

Electrical connection

Connect the plugs of the actuators to the M12 sockets. Cover the
sockets not used with the protective caps (AC3004) to guarantee pro-
tection rating IP67.
outputs
3 4
5
2 1
Socket M12
switching output +
external supply -
n.c.
Addressing
Assign a free address between 1A and 31B. At the factory the address
is set to 0.
Do not remove the addressing plug while live.
Addressing with the addressing unit AC1144
If the mounted and wired module is used with the FC-E lower part
AC5011 (with addressing socket), it can be addressed via the address-
ing cable (E70213).
If it is used with the FC-E lower part AC5003 (without addressing sock-
et) the module must first be addressed via the addressing unit AC1144
and then mounted onto the lower part.
6
PAGE
3x LED1 yellow
Pin
4
3
1,2,5
LED3 infrared reciever
LED2 red
FAULT
fixture infrared
adapter
LED green
PWR sensor
supply o.k
3 sockets
M12