Replacing The Battery - Kessel Comfort PLUS Notice D'utilisation D'origine

6.2

Replacing the battery

The Comfort PLUS control unit is equipped with batteries in case of a power outage.
These batteries must be replaced if this is indicated on the display.
To replace battery:
Isolate the system! Make sure that cables and electrical components are
disconnected from the power supply during work.
▶ Move the main switch (1) on the control unit to the OFF position and open the
housing.
▶ Remove the cable ties, take both batteries out (2) and replace them by new
ones.
▶ Fix the batteries in place using the cable ties.
010-700_01 Installation and operating manual
2
1
Fig. [11]
57