1. Notes on this manual
The following conventional representations make it easier to navigate the
manual:
Symbol
[1]
(5)
➊➋➌➍➎➏➐➑➒➓
Check whether manual control has
been activated.
Press OK.
System is ready for operation.
➲
Chap "2. Safety"
|Define maintenance
interval|
Bold type
Italics
L
38
Explanation
See Figure 1
Position number 5 from the adjacent figure
Action step in figure
Prerequisite for action
Action step
Result of action
Cross-reference to Chapter 2
Screen text
Particularly important or safety-relevant
information
Variant or additional information (e. g. only
applies for ATEX variant)
Technical information or instructions which
must be paid particular attention.
Installation and operating manual
2. Safety
The following symbols are used:
Icon
Observe the instructions for use
WEEE icon, product governed by RoHS Guideline
Warns of a hazard for persons. Ignoring this warning can lead to
WARNING
Warns of a hazard for persons and material. Ignoring this
warning can lead to serious injuries and material damage.
CAUTION
Meaning
Isolate device!
CE marking
Warning, electricity
Ground before use
serious injuries or death.
010-700_01