Agilent Technologies Turbo-V 3K-T Notice De Mode D'emploi page 203

MESSAGE
OVERVOLTAGE
FLOW METER
ALARM
Turbo-V 3K-T Rack Controller User Manual / 87-900-988-01 (D)
DESCRIPTION
A failure has occurred in
the controller power supply
section, or the controller
has received a spurious
signal.
Alarm relating to the purge
flow. The flow value
remained at less than the
set threshold for 10
seconds or more.
Instructions for Use
Error Messages
REPAIR ACTION
Press the START button twice to
start the pump again. If the
message is redisplayed, contact
Agilent for maintenance.
Check the correct operation of
the gas supply circuit.
203/260
16