Use - Agilent Technologies Turbo-V 3K-T Notice De Mode D'emploi

Use

This paragraph describes the fundamental operating procedures.
Detailed information and operating procedures that envolve optional
connection or option are supplied in the paragraph "USE" of the
appendix "Technical Information". Make all vacuum manifold and
electrical connections and refer to Turbo-V pump instruction manual
before operating the Turbo-V controller.
WARNING! To avoid injury to personnel and damage to the equipment, if the pump is
laying on a table make sure it is steady. Never operate the Turbo-V pump if
the pump inlet is not connected to the system or blanked off.
The input signal J1 connector should be left in position including the shipping
NOTE
links if no external connections are made. The forepump and Turbo-V pump can
be switched on at the same time.
Turbo-V 3K-T Rack Controller User Manual / 87-900-988-01 (D)
Instructions for Use

Use

197/260
16