Introduction; Safety Precautions - KERN KME-TM Mode D'emploi

1 Introduction

1.1 Safety precautions

CAUTION!
Do not use KME-TM / KMN-TM in hazardous areas!
Our product range includes special devices for hazardous areas.
CAUTION!
Use only weighing terminals with Protection Class IP65 if:
• the weighing terminal is used in wet areas
• wet cleaning is necessary
• the weighing terminal is used in a dusty environment
Even with Protection Class IP65, the weighing terminal must not be used in
environments with corrosion risk.
▲ Never flood the weighing terminal or immerse it in liquid.
DANGER!
Electric shock hazard!
▲ Always pull out the mains plug before commencing any work on the
DANGER!
Hazard of electric shock if the mains cable is damaged!
▲ Check the mains cable for damage regularly. Swich off the weighing ter-
▲ Maintain a clearance of at least 3 cm on the rear side of the weighing
CAUTION!
Do not at all open the weighing terminal!
The warranty is void if this stipulation is ignored. The weighing terminal may
only be opened by authorized persons.
weighing terminal.
minal immediately if the mains cable is damaged.
terminal in order to prevent the mains cable bending too much.
3