F4 - Communication Menu - KERN KME-TM Mode D'emploi

F3.1.2 – Brightness with battery operation
low brightness
Lo
high brightness
MEd
To save battery power, we recommend the Lo setting.
F3.2 – Auto power off
The weighing terminal is switched off if during the set time no action was on the weighing
terminal or on the weighing platform.
Factory setting
Function disabled
Possible settings
F3.3 – Battery type
This menu item is only available with weighing terminals in battery operation.
dry battery
drY
NiMH rechargeable battery
ni-MH
LEAd-A lead-acid rechargeable battery
F3.10 – Reset terminal settings
Reset all parameters F3.x(.x) to factory setting.
5.5 F4 – communication menu
Factory settings are printed in bold characters.
F4.1 – Connections
When pressing
Print
APrint Stable weight values are printed automatically
Additional settings: F4.2.5 and F4.2.6
Communication via the METTLER TOLEDO Standard Interface Command Set
SICS
Contin Toledo continuous Mode
F4.2 – Format
F4.2.1 – Line format
Multi line
MULti
SinGLE Single line
5 (minutes)
0
0.5 ... 60 (minutes)
, the current display is printed
18