KERN KME-TM Mode D'emploi page 31

SICS interface commands
The weighing terminal supports the MT-SICS (METTLER TOLEDO Standard Interface Command
Set) command set. With SICS commands, it is possible to configure, query and operate the
terminal from a PC. SICS commands are divided up into various levels.
For further information about the MT-SICS command set, see MT-SICS Manual (Order No.
22 011 459) or contact the KERN & Sohn Customer Service.
Command
LEVEL 0 @
I0
I1
I2
I3
I4
S
SI
SIR
Z
ZI
LEVEL 1 T
TAC
TI
Toledo Continuous commands
Command
P
T
Z
C
S
Meaning
Reset the scale
Inquiry of all available SICS commands
Inquiry of SICS level und SICS version
Inquiry of scale data
Inquiry of scale software version
Inquiry of serial number
Send stable weight value
Send weight value immediately
Send weight value immediately and repeatedly
Zero the scale
Zero immediately
Tare
Clear tare
Tare immediately
Meaning
Print out the current result
Tare the scale
Zero the display
Clear the current value
Define reference piece number
30