Applications - KERN KME-TM Mode D'emploi

Further notes on cleaning
• Use a damp cloth.
• Do not use any acids, alkalis or strong solvents.
KME-TM
• Do not clean the weighing terminal using a high-pressure cleaning unit or under running
water.
• Follow all the relevant instructions regarding cleaning intervals and permissible cleaning
agents.
KMN-TM
• Do not clean the weighing terminal using a high-pressure cleaning unit.

4 Applications

Depending on the setting of F2.1 parameter in the operator menu, different applications can
be activated using the
4.1 Displaying weight values with a higher resolution
For this purpose F2.1=MULt must be set in the operator menu (factory setting).
➜ Press
.
The weight value is displayed with a higher resolution for about 20 seconds.
Note
The weight value in higher resolution cannot be printed.
4.2 Switching weight unit
For this purpose, F2.1=Unit must be set in the operator menu.
➜ Press
.
The weight value is displayed in the second weight unit.
Note
The displayed weight unit remains until it is switched again.
key.
11