KERN KME-TM Mode D'emploi page 20

F4.2.2 – Print format
StAndr Standard (current display)
over / good / under
OVEr
Piece number
Count
F4.2.3 – Print language
English
EnG
Chinese
CHn
F4.2.4 – Add line feed
Factory setting
Possible settings
F4.2.5 – Auto print threshold
This menu item is only available if F4.1=APrint is set.
A stable weight value which is higher than the set value is printed automatically.
Factory setting
Possible settings
F4.2.6 – Auto print reset threshold
This menu item is only available if F4.1=APrint is set.
The scale must be unloaded below the set value before a new weight value can be printed
automatically.
Factory setting
Possible settings
F4.3 – Parameters
F4.3.1 – Baudrate
1200
2400
4800
9600
19200
3 (lines)
0 ... 9 (lines)
10 (d)
0 ... max. load
10 (d)
0 ... max. load
19