Menu - KERN KFB-TAM Instructions D'utilisation Et D'installation

8 Menu

The application of the display unit as a verified weighing system requires that you
short-circuit the two contacts [K1] of the circuit board, using a jumper. To that effect,
a menu for verified weighing systems is available. For menu layout see chap. 8.2.
There is no jumper for weighing systems that cannot be verified. To that effect, a
menu is available for weighing systems that cannot be verified, Menu layout
see chap. 8.1
Navigation in the menu:
Call up menu
Select menu block
Select setting
Change settings
Acknowledge setting /
exit the menu
Return to weighing
mode
KFB/KFN-TAM-BA_IA-e-1832

Switch-on balance and during the selftest press

Press , ,
block „PO CHK" will be displayed.

With help of , the individual menu items can be
selected one after the other.

Confirm selected menu item by pressing
current setting will be displayed.

To change to the available settings, press the
navigations keys as described in chap. 2.1.

Either save by pressing

Press repeatedly to exit menu.
subsequently, the first menu
or cancel by pressing
.
. The
.
39