Inspect/Adjust Periodically - Invacare Patriot Manuel De L'utilisateur Et D'entretien

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Ensure all caster/wheel/fork/headtube fasteners are secure.
Ensure all hardware is tight.
Ensure hand grips are not loose.

INSPECT/ADJUST PERIODICALLY

Wheelchair rolls straight (no excessive drag or pull to one side).
Arms are secure but easy to release and adjustment levers engage properly.
Adjustable height arms operate and lock securely.
Armrest pad sits flush against arm tube.
No bent or protruding metal on clothing guards.
All fasteners on clothing guards are secure.
Seat and/or back upholstery have no rips.
Inspect adjustable angle back attaching hardware is securely tightened.
No excessive side movement or binding when rear wheels are lifted and spun.
Inspect handrims for signs of rough edges or peeling finish.
Inspect tires/casters for flat spots and wear.
Check pneumatic tires for proper inflation (recommended tire pressure is listed on the
side wall of the tire).
Wheel lock pivot point are free of wear and looseness.
Clean upholstery and armrests.
Sealed bearings and axle nut tension are correct.
Wheel/fork assembly has proper tension when caster is spun. Caster should come to
a gradual stop.
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
Wheel bearings are clean and free of moisture.
Wheel locks are easy to engage.
Clean quick-release axles with a Teflon
Ensure axles are free from dirt, lint, etc.
Ensure roller bearings are free from dirt, lint, etc.
Adjust wheel locks as tires wear.
Clean and wax all parts.
Patriot™
® lubricant.
26
Part No 1088909