Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 Switching on the power supply
1
Insert the power plug into an electrical
socket.
2
Turn the lock switch key to the "open"
position.
3
Slide the power switch to the "on"
position.
5 Check the unit.
1
Make sure there are no tears or rips in the fabric.
See Caution No. 15 on page 3.
2
Make sure there is no foreign matter between
the parts of the unit.
See Caution No. 17 on page 3.
3
Make sure the massage heads are in the
retracted position.
When the massage heads are not in the retracted
position
Press the
button twice to return the massage heads to the retracted
position.
4
Make sure the legrest is in the fully lowered
position.
When the legrest is not fully lowered
The legrest will lower by pressing on
See Caution No. 9 on page 2.
5
Check that the legrest is locked into place.
See Caution No. 17 on page 3.
twice.
1
2
Legrest
Check
3
Fabric
Backrest
Comfort
cushion
Retracted position
Hand/Arm massage
section
18
Publicité
Table des Matières
