Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT INSTALLATION
PLEASE READ SAFETY AND PRODUCT DIMENSIONS PAGES
BEFORE PROCEEDING WITH INSTALLATION
1) The downdraft system is installed directly behind the cooktop. For
easiest installation, install the ventilation system first, then the
cooktop.The ventilation system must not be installed in an area where
there are strong drafts, for instance near windows, doors, etc.
2) Remove the 10" round connection plate from the front of the
downdraft (FIGURE 9)
3) Put the top mounting brackets in place with screws.
(FIGURE 10)
4) Screw the bottom mounting brackets (A in FIGURE 10) to the side of
the housing using 2 screws each. Do not tighten the screws. The
brackets are different for the right and the left side. Attach them with
mounting clip "A" pointing up.
FIGURE 9
FIGURE 10
Version 3/15 - Page 11
Publicité
Table des Matières
