Software; Technical Data - Migatronic RALLY MIG 161i Manuel D'instruction

SOFTWARE

In case of exchange of the control unit, software must
be reloaded, using an SD card.
Latest software can be downloaded under Product
software at www.migatronic.com/login. Save the
software on an SD card containing the folders and one
or more of the files shown below.
To order SD card, use item no. 12646000.
Software reading
 Insert the SD-card in the slide in the right side of
the machine.
 Turn on the machine.
 The display flashes shortly with three lines.
 Wait until the set current is displayed.
 Turn off the machine and remove the SD card.
 The machine is now ready for use.

All machine user settings are deleted
when new software has been inserted.
Therefore, always remove the SD-card from
the machine after the software update.
Thereby, continuous software update is
avoid each time the machine is turned on.

TECHNICAL DATA

Power source:
Mains voltage (50Hz-60Hz)
Fuse
Mains current, effective
Mains current, max.
Power, (100%)
Power, max
Open circuit power
Efficiency
Power factor
Current range
Duty cycle 100% at 20°C
Duty cycle 60% at 20°C
Duty cycle 40% at 20°C
Duty cycle 100% at 40°C
Duty cycle 60% at 40°C
Duty cycle 25% at 40°C
Open circuit voltage
1
Sphere of application
2
Protection class
Norm
Dimensions (LxWxH)
Weight
S
1
This machine meets the demand made for machines which are to
operate in areas with increased hazard of electric chocks
2
Equipment marked IP23 is designed for indoor and outdoor applications
15
RALLY MIG 161i
1x230V
16A
13A
22.9A
2.4kVA
4.4kVA
30W
0.8
0.99
20-160A
135A
145A
160A
100A
115A
160A
75V
S
IP 23
EN/IEC60974-1
EN/IEC60974-5
EN/IEC60974-10 (Class A)
45x23x37 cm
13 kg