Problems And Solutions; Outgoing Calls; Incoming Calls - Fysic FX-8025 Mode D'emploi

14 PROBLEMS AND SOLUTIONS

14.1 OUTGOING CALLS:

• There's no dialling tone.
- The outside line is being used by (one of) the
wireless handset(s). Wait until that call is finished
and try again.
- Check the connection between the base and
your telephone connection (when in doubt,
connect a different telephone to your telephone
connection).
• The power supply is lost.
- Check whether the adaptor is plugged into the
back of the phone and make sure the power
adaptor is plugged into a wall socket marked with
230V (you can check this by e.g. connecting a
floor lamp to that wall socket).

14.2 INCOMING CALLS:

• No notification of incoming calls:
- The bell is disabled; enable it. (see paragraph
11.1)
- Check the connection between the phone
and your telephone connection (when in doubt,
connect another telephone to your telephone
connection)
• You are continuously busy:
- Check whether you have a 2nd phone with its
receiver next to the phone.
- Check whether (one of) the wireless handset(s)
registered to your telephone is keeping the line
busy.
- Connect another phone to your phone
connection, and use this to check whether the
malfunction originates from your connection or
your carrier.
197