4
INSTALLATION
4.1 HANDSET CRADLE / CHARGER:
Insert the adaptor of the handset cradle / charger
into a 230V wall socket.
ONLY CONNECT THE INCLUDED
ADAPTER. CONNECTING OTHER
ADAPTERS MAY RESULT IN DANGEROUS
SITUATIONS OR MAY CAUSE DAMAGE TO THE
ELECTRONICS OF THE PHONE.
4.2 HANDSET:
1. Open the battery compartment of
the handset, by sliding the battery
cover down.
2. Insert the batteries into the battery
compartment; at this, pay attention to
the polarity (+ and -).
3. Slide the battery cover back onto
the handset and place the handset
on the base station.
4. Leave the handset continuously
during 15 hours on the base station,
to charge the batteries properly.
INSERT ONLY RECHARGEABLE NiMH
BATTERIES. THE USE OF NOT RE-
CHARGEABLE BATTERIES MAY CAUSE DAN-
GEROUS SITUATIONS OR EXPLOSION HAZARD.
As soon as the batteries of the wireless handset
are charged and the wired phone has been con-
nected according to the related instructions, the
wireless handset is ready for use.
159
-
+
-
+
the charge indica-
tor will illuminate
as soon as and
for as long as the
handset is placed
onto the charger