Description Of Individual Parts; Designation Of Individual Parts - VOLTCRAFT VC-56 Mode D'emploi

• The limit value applicable to alternating voltage for
hazardous contact voltage (in accordance with DIN
VDE 0100, part 410) is also indicated by the ligh-
tening symbol LED (B).
• If the neutral wire (N) or the earth wire (PE) is inter-
rupted, no display is shown!
• Keep the voltage tester in a clean condition, and store
it in a dry place in the correct manner.
• Keep the device out of the reach of children.

Description of Individual Parts

(see fold-out page)
1 Test tip L1 (-)
2 Push-button L1
3 Handle L1 with noticeable handle end
4 Connection cable
5 Battery compartment
6 Handle L2 with noticeable handle end
7 Button for measuring point lamp
8 Push-button L2
9 LCD display
10 Measuring point lamp
11 Test tip L2 (+)
VC-56 LCD display
A Numeric display for voltage readings
B Phase display for „single-pole" voltage tests
C Low Imp display (measuring with 200 kΩ)
D Rotating field direction display (L/R)
E Display for continuity test
F Polarity indicator for „ - " DC voltage
G Bargraph display
H Voltage type indicator (AC or DC)
I „Low Bat" indicator if batteries are low
17