Troubleshooting; Technical Data; Disposal - Maxx-world Z 05130 Mode D'emploi

Troubleshooting

If the device is not working properly, please check whether you are able to rectify the problem
yourself fi rst. Otherwise contact customer service. Do not attempt to repair a defective device
yourself!
Problem
The function buttons cannot
be activated. The corresponding
LED lights do not illuminate.
The pillow does not respond to
snoring noises.
The storage battery is not
charged. The charge control
light is not on.

Technical data

Product number:
Model:
Pillow size:
Material pillow:
Material cover:
Voltage supply:
Mains adapter:
Model:
Input voltage:
Output voltage:
Safety class:

Disposal

The packaging material is recyclable. Dispose of the packaging in an environmental-
ly-friendly manner and make it available to the collection service for recyclable mate-
rials.
Dispose of the device in an environmentally-friendly manner when you decide to part
with it. The device does not belong in the household waste. Dispose of it at a recycling
centre for old electrical and electronic devices. For more information, please contact
the administration in your community.
Possible cause/solution
• Did you press the On/Off button? Is the corresponding
LED on?
• Did you press the
light illuminated?
• You pressed the
does not illuminate. Is the storage battery empty? Re-
charge it (see chapter "Charging the storage battery").
• Is the noise sensor sensitivity set too low? Turn the con-
trol knob to + in order to increase the sensor sensitivity.
• Is the mains adapter connected properly?
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
Z 05130
ST-157
approximately 58 x 35 x 12 cm
thermoplastic polyurethanes (TPU), polyethylene (PE)
75 % cotton, 25 % polyester,
9 V DC
P6-090yyyEU
220 – 240 V ~ 50 Hz
9 V DC
II
17
main switch? Is the red power
main switch, but the red power light