1. For hygienic reasons, the device should be cleaned
after every use.
2. Remove the roller from the device (see the "Chang-
ing the Roller" section) and brush off any fl akes of
skin which may remain on it.
3. Hold the head of the device under running water for
5 to 8 seconds.
4. Dry the device thoroughly.
5. Insert the roller again and place the protective cover
on the device.
6. Store the device and accessories in a dry place that
is out of the reach of children.
Troubleshooting
Problem
The device is not
working.
The device stops
during treatment.
The calluses are
not being proper-
ly removed.
Possible cause/solution
Are the batteries too weak or incor-
rectly inserted? If necessary, insert
new batteries (see the "Inserting/
Changing Batteries" section).
Do not use excessive pressure. For
safety reasons, the device stops
automatically when too much pres-
sure is applied on the skin.
The roller is worn. Replace it (see
the "Changing the Roller" section).
30